Piping Engineer, QAPCO - site based - QAT003K

 Specific Accountabilities

• Conduct site verification with relevant documents (P&ID, GAD, ISO, etc.) and data collection of existing and new facilities as part of study preparation.
• Carry out the design and technical reviews for all areas of work covered in mechanical/piping engineering projects while evaluating requests and recommending appropriate solutions and proposing changes as necessary within the defined project scope and protocols to facilitate the achievement of defined objectives. 
• Consults with representatives of Process, Construction, Maintenance, Inspection, Operation, Reliability, etc. to ensure that designs meet the objectives.
• Execute verification, studies and detail design following best engineering practices and optimization in terms of cost, construction simplicity, operability and maintainability, HSSE, etc.
• Prepares design specifications for piping works such as routing, supports, flexibility analysis, the material of construction, etc.
• Develops calculations for piping wall thickness, reinforcement pad, verification for flow velocity, etc.
• Develops functional and drain/collection systems (water, sewage, oil, etc.) layouts.
• Prepares supply and services purchase specifications. 
• Develops studies for new installation equipment layout to optimize the available space with respect to the best engineering practice.
• Prepares MTOs and BOQs.
• Prepares Scope of Work and technical specifications for piping construction subcontracts.
• Prepares technical documentation for piping material requisition. 
• Ensure compliance to all relevant health, safety, security, environmental and quality management procedures.
• To work closely with HSSE on related tasks.
• Ensure updating documentation related to modifications (projects). 
• Participate in modifications(projects)risk assessment studies such as HAZOP, etc. 
• Carry out technical evaluations.
• Preparation of mechanical design, constructive drawings of piping installation and plot plans drawings. 
• Provide regular progress report related to assigned modifications(projects).
• Preparation of specific reports upon request.

What you will bring

 

Technical and Industry Experience

• Minimum 8 years and a maximum of 12 years experience in design/engineering in the field of Oil and Gas/Petrochemical industry
• Good knowledge of discipline design/engineering with sufficient experience in different discipline areas.
• Candidates presently in Qatar will be preferred due to COVID19 related travel and visa limitations
                                         LINK TO APPLY 

Education – Qualifications, Accreditation, Training

Required:

• Full-Time Bachelor’s Degree in Piping or Mechanical Engineering from an accredited university
• MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. 
• Job-Specific Skills:
  • Knowledge of piping design/engineering.
  • Familiar with static and rotating equipment.
  • Familiar with mechanical equipment package systems.
  • Knowledge of support and insulation types for different services.
  • Knowledge of manual valve types and its suitability for different applications, as well as pressure relief valves.
  • Familiar with Industrial/International Piping Codes & Standards and able to identify and analyse different piping systems, for instance (API, ANSI, ASME, DIN, etc.).
  • Generating of ISO and GAD sketches based on site conditions, above and underground piping.
  • Interpreting of PFD/PID and transfer it to piping drawings ready for construction.
  • Understanding equipment requirements connected to piping system.
  • Using Caesar II for static and dynamic piping stress analysis.
  • Prepares design sketches and drawings of various facilities based on modification requests, design calculations, field measurements, codes and standards.
  • Makes the required mechanical calculations on computer/by hand.
  • Assist in inspection during testing and evaluate test results of equipment.

Preferred:

Undertaking Chartered Professional Engineer (CPEng) status.